1:24 Victoria wardrobe

This kit makes a Victorian Eastlake style wardrobe. I also have a matching bed, dresser and bedside listed in my store.

The photo shows the finished but undecorated wardrobe as it is made up from the kit. The kit is laser cut from a quality ply and card.

The finished armoire measures approximately 25mm deep x 79mm wide x 90mm high.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction. The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. This kit is not suitable for small children as it contains very small and fragile parts. It is a kit and therefore must be put together by the purchaser.