1:24 Sweetpea Patisserie kit

This little shop box kit was based on a real shop in France - actually a boucherie. The kit has lots of sweet details including stone etching, lots of faux ironwork and a working front door.

The front is a separate panel that just lifts off. The interior roombox is simple with no windows or doors. You can also purchase the full interior kit set, designed specifically to fit inside this shop, at a discounted price, which is shown in the photos.

The kit is made from quality lightweight 3mm ply for the main structure and thinner ply for the detail parts. Acrylic is provided for windows. Detailed instructions with photos are provided, and I am available if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need some basic supplies, including a fine craft knife, wood working glue, sandpaper, tweezers, paints and brushes, and a pencil to finish this kit. Clamps or masking tape can also be useful. There are a few other basic requirments in addition to those listed here. I have included exterior painting instructions to achieve a similar finish to that shown in the photos, including how to faux age the structure.

Finished exterior dimensions are 31.7cm wide x 17.8cm deep x 40.2cm high.

The interior measurements of the roombox are 168mm deep x 195mm wide x 150mm high.

This kit is not suitable for small children. It is a kit and therefore must be put together by the purchaser.

Please read my shop policies carefully, particularly in regard to plywood.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**