1:24 Robin chest of drawers kit

This kit makes a sweet vintage style tall chest of drawers, perfect for your vintage, shabby, cottage or country bedroom. The detail parts are made from brown card, and the drawers all open.

The photo shows the chest after it has been put together. The kit is laser cut from quality plywood, wood and card.

Approximately 75mm tall, 20mm deep and 33mm wide.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints and brushes to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.

This kit is not suitable for small children as it contains very small and fragile parts. It is a kit and therefore must be put together by the purchaser.