1:24 Patisserie counter kit

This makes a pretty counter perfect for a bakery, boulangerie, patisserie, cake or candy shop. As this counter has been made specifically to fit the Sweetpea Patisserie, it is flat on the right side (looking at it from the front), meaning there is no countertop overhang on the right side. This allows the counter to sit flush against the side wall.

The first photo shows the unfinished kit made up and the second photo shows my own finished and painted counter. The kit is laser cut from a quality ply and wood with acrylic sneezeguards.

Finished dimensions are 148mm wide x 38mmm deep x 76mm high.

The first photo shows the counter after it has been made up and painted; the second photo shows the counter made up but unpainted; and the last photo shows all the patisserie furniture kits. Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, masking tape, tweezers and paints and brushes to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**