1:24 scale dollhouse miniature kits


Hallstand kit

Hallstand kit


This kit makes a mirrored hall stand for your tiny house entrance, living room or mudroom. The drawer opens.

The first photo shows the painted and finished hall stand after it has been put together and the second photo shows a unpainted hall stand after it has been made up. The kit is laser cut from quality plywood, wood and plastic mirror.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints and brushes to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.

This kit is not suitable for small children as it contains very small and fragile parts. It is a kit and therefore must be put together by the purchaser.

Add To Cart